Lenovo THINKSERVER RD230 Manuel d'utilisateur télécharger pdf (Page 52)

To remove a memory module, do the following:

1. Remove all media from the drives and turn off all attached devices and the

server. Then, disconnect all power cords from electrical outlets and disconnect

all cables that are connected to the server.

2. Remove the server cover. See “Removing the server cover” on page 42.

3. Locate the memory slot with the memory module that you want to remove. See

“Locating parts on the system board” on page 32 for the locations of the

memory slots.

4. Carefully open the retaining clips on each end of the memory slot and then

grasp the memory module straight up by its edges.

5. If you are instructed to return the failing memory module, follow all packaging

instructions and use any packaging materials that are supplied to you for

shipping.

6. To complete the removal procedure, go to “Completing the parts replacement”

on page 87.

Removing or installing internal drives

This section provides instructions on how to remove or install internal drives for

the server.

See “Specifications” on page 10 for information about the types of internal drives

that the server supports and other important information, and see “Front view” on

page 29 for the locations of the drive bays in the server.

When installing an internal drive, be sure to consider the following information:

v Make sure that you have all the cables and other equipment that is specified in

the documentation that comes with the drive.

v Select the drive bay in which you want to install the drive.

v Check the instructions that come with the drive to see whether you have to set

any switches or jumpers on the drive. If you are installing a SAS device, be sure

to set the SAS ID for that device.

v The EMI integrity and cooling of the server are protected by having all bays,

PCI slots, and PCI Express slots covered or occupied. When you install a drive,

PCI card, or PCI Express card, save the EMC shield and filler panel from the

bay, PCI card slot, or PCI Express card slot in the event that you later remove

the device.

Figure 11. Removing the memory module

46 ThinkServer RD230 Types 1043, 1044, 4010, and 4011: Hardware Maintenance Manual

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 147 148

Pas de commentaire

Lenovo THINKSERVER RD230 Manuel d'utilisateur Page 52