Lenovo TD100 Manuel d'utilisateur télécharger pdf (Page 173)

POST error codes

The following table describes the POST error codes and suggested actions to

correct the detected problems.

v Follow the suggested actions in the order in which they are listed in the Action column until the problem

is solved.

v See Chapter 3, “Parts listing, TD100 Types 6398, 6399, 6419, 6429, 4203, and 4206,” on page 25 to

determine which components are customer replaceable units (CRU) and which components are field

replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Error code Description Action

062 Three consecutive boot failures using the

default configuration.

1. Update the system firmware to the latest level

(see “Updating the firmware” on page 15).

2. (Trained service technician only) Replace the

system board.

101 Tick timer internal interrupt failure. (Trained service technician only) Replace the system

board.

102 Internal timer channel 2 test failure. (Trained service technician only) Replace the system

board.

151 Real-time clock error.

1. Reseat the battery.

2. Clear CMOS memory. See “System-board

switches” on page 14 for information about how

to clear CMOS.

3. Replace the following components one at a time,

in the order shown, restarting the server each

time:

a. Battery

b. (Trained service technician only) System

board

161 Real-time clock battery failure.

1. Reseat the battery.

2. Clear CMOS memory. See “System-board

switches” on page 14 for information about how

to clear CMOS.

3. Replace the following components one at a time,

in the order shown, restarting the server each

time:

a. Battery

b. (Trained service technician only) System

board

Chapter 5. Diagnostics 155

1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 253 254

Commentaires sur ces manuels

Pas de commentaire

Lenovo TD100 Manuel d'utilisateur Page 173

Commentaires sur ces manuels