Lenovo TD100 Manuel d'utilisateur télécharger pdf (Page 147)

v Non-hot-swap models, lift up the power-supply cage handle and pull the

power-supply cage assembly all the way up until the retainer latch locks the

cage in place on the chassis.

5. Remove the front fan-cage assembly (see “Removing the front system fan

cage assembly” on page 108.

6. Remove the simple-swap hard disk drives that are installed in the hard disk

drive cage (see “Removing a simple-swap hard disk drive” on page 92).

7. Disconnect the combination signal/power cable from the simple-swap

backplate.

8. Lift up on the spring-release latch on the side of the drive cage and rotate the

simple-swap backplate away from the drive cage until the backplate tabs at the

bottom of the drive cage disengage from the chassis.

1 Locator pins

2 Spring-release latches

3 Hard disk drive backplate

9. Remove the simple-swap backplate and set it aside.

10. If you are instructed to return the simple-swap backplate, follow all packaging

instructions, and use any packaging materials for shipping that are supplied to

you.

Chapter 4. Removing and replacing server components 129

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 253 254

Pas de commentaire

Lenovo TD100 Manuel d'utilisateur Page 147