Lenovo H430 Desktop Manuel d'utilisateur télécharger pdf (Page 21)

Chapter 5. Using the Setup Utility

press Enter.

3. The password dialog box will be displayed. Type the new password, and

press Enter.

4. when prompted to conﬁrm the password, type the password again. If

you type the password correctly, the password will be installed.

To delete a previously set user password, do the following :

Note: When prompted for a password, you must type your supervisor

password.

1. From the Setup Utility program menu, select Change User Password

and press Enter.

2. when you type the user password. a message will display that Enter

New Password. Press Enter and a message will display that indicates the

password has been disabled.

3. Press any key to contine.

Using Device

Device is used to enable or disable user access to the following device:

PS/2 Mouse Support When this feature is set to Disable, the device

of PS/2 Mouse Support is disabled and will

not be displayed in the system conﬁguration.

To set Device, do the following:

1. Start the Setup Utility program (see “Starting the Setup Utility program”

on page 16).

2. From the Setup Utility program menu, select Device.

3. Select Onboard PS/2 Mouse Support.

4. Select Disable or Enable and press Enter.

5. Return to the Setup Utility program menu and select Exit and then Save

changes and Exit.

Note: If you do not want to save the settings, select Discard Changes

and Exit or Discard Changes. You can set others such as Floppy

Drive Setup, Serial Port Setup, Parallet Port Setup, USB Setup,

Video Setup, Audio Setup, Network Setup and so on. See the

information displayed on the right side of the screen.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 65 66

Pas de commentaire

Lenovo H430 Desktop Manuel d'utilisateur Page 21