Lenovo T545 Manuel d'utilisateur télécharger pdf (Page 20)

When you first use your monitor you must perform Auto Setup. This procedure

sets up your monitor to process the video signals from your computer without

image discoloration or smearing. After you perform Auto Setup, the settings are

stored and used each time you turn on the monitor.

In order to optimise the displayed image a set-up utility is provided on the

IBM Monitor Installation Diskette. Operation of this utility is dependent on the

operating system on your computer. For correct operation locate the operating

system on your computer from the table below and follow the appropriate

instructions. You may choose to run AUTO SETUP for each operating system

that you use. This means that if you sometimes use your monitor while running

any version of Windows and sometimes also use it from within DOS (not a DOS

window), you must run AUTO SETUP for both Windows and DOS. You may run

versions of AUTO SETUP in any order.

Before you begin AUTO SETUP for your computer:

1. Make a backup copy of the setup diskettes supplied with the monitor.

2. Make sure the computer video mode is set in the range of the

supported screen resolution shown in the table on page18.

You should perform AUTO SETUP for each screen mode you use.

Auto Setup

Before carrying out this

section, it is very important

that The Setup Diskette for

Windows 95 or Windows 98

has been run.(see page6)

The Setup Utility included

on the setup diskette is for

displaying dot patterns. They

do not replace or modify the

display driver.

The Auto Setup

instructions require the

monitor to be warmed up for 15

minutes. This is not required

for normal operation.

By pressing the and

keys simultaneously allows

direct access to the auto set-up

controls.

If your computer does not

run with the setup

diskettes shipped with the

monitor, refer to Manual Setup

on page 12

The AUTO SETUP process

only applies to the current

screen mode. When a new

mode is selected, repeat this

section to reset the monitor.

Operating System

DOS

Auto Setup for DOS on page 9

Auto Setup Microsoft Windows 3.1,

Windows 95, Windows 98, Windows 2000

or Microsoft Windows NT 4.0 workstation

on page 10

Microsoft Windows 3.1

Microsoft Windows 95

Microsoft Windows 98

Microsoft Windows 2000

Microsoft Windows NT 4.0

workstation

Corresponding Auto Setup procedure

Auto Setup

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 58 59

Commentaires sur ces manuels

Pas de commentaire

Lenovo T545 Manuel d'utilisateur Page 20

Commentaires sur ces manuels

Produits connexes et manuels pour Téléviseurs et moniteurs Lenovo T545