Lenovo THINKSERVER TS100 6434 Manuel d'utilisateur télécharger pdf (Page 25)

Removing the two-piece bezel

When you work with some devices, such as drives in bays 1 through 7 (or bays 1

through 11 if you have the 2.5-inch eight-drive model, see page Table 5 on page

17), you must first remove the two-piece bezel to access the devices.

Notes:

v Before you remove the upper bezel, you must unlock and remove the side cover

and remove the lower bezel.

v If you are removing only the lower bezel, you do not have to remove the side

cover. However, the side cover must be unlocked.

remove the two-piece bezel, complete the following steps:

1. Unlock the side cover.

2. Remove the side cover (see “Removing the side cover” on page 10).

3. Press the round blue release button on the right side of the lower bezel and tilt

the lower bezel forward to disengage it from the chassis.

4. Lift the lower bezel to disengage the two bottom tabs from the chassis. Set the

lower bezel aside.

Chapter 2. Installing optional devices 11

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 109 110

Pas de commentaire

Lenovo THINKSERVER TS100 6434 Manuel d'utilisateur Page 25