Lenovo ThinkCentre A61 Manuel d'utilisateur télécharger pdf (Page 43)

3. Locate the Clear CMOS/Recovery jumper on the system board. See

“Identifying parts on the system board” on page 7.

4. Move the jumper from the standard position (pins 1 and 2) to the maintenance

or configure position (pins 2 and 3).

5. Replace the computer cover and connect the power cord. See Figure 39 on page

31.

6. Restart the computer, leave it on for approximately ten seconds. Turn off the

computer by holding the power switch for approximately five seconds. The

computer will turn off.

7. Repeat steps 1 through 3 on page 34.

8. Move the Clear CMOS/Recovery jumper back to the standard position (pins 1

and 2).

9. Replace the computer cover and connect the power cord. See Chapter 4,

“Completing the parts replacement,” on page 31.

Chapter 5. Security features 35

1 2 ... 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Lenovo ThinkCentre A61 Manuel d'utilisateur Page 43