Lenovo ThinkServer TD200x Manuel d'utilisateur télécharger pdf (Page 189)

v Follow the suggested actions in the order in which they are listed in the Action column until the problem

is solved.

v See the "Parts Listing" section in the Hardware Maintenance Manual to determine which components are

customer replaceable units (CRU) and which components are field replaceable units (FRU).

v If an action step is preceded by “(Trained service technician only),” that step must be performed only by a

trained service technician.

Please ensure that the IMM is

flashed with the correct firmware. The

IMM is unable to match its firmware

to the server.

Error The server does not support

the installed IMM firmware

version.

Update the IMM firmware to a

version that the server supports.

Important: Some cluster

solutions require specific code

levels or coordinated code

updates. If the device is part of a

cluster solution, verify that the

latest level of code is supported

for the cluster solution before you

update the code.

IMM reset was caused by restoring

default values.

Info The IMM has been reset

because a user has restored

the configuration to its

default settings.

No action; information only.

IMM clock has been set from NTP

server %1.

Info The IMM clock has been set

to the date and time that is

provided by the Network

Time Protocol server.

No action; information only.

SSL data in the IMM configuration

data is invalid. Clearing configuration

data region and disabling SSL+H25.

Error There is a problem with the

certificate that has been

imported into the IMM. The

imported certificate must

contain a public key that

corresponds to the key pair

that was previously

generated through the

Generate a New Key and

Certificate Signing

Request link.

1. Make sure that the certificate

that you are importing is

correct.

2. Try to import the certificate

again.

Flash of %1 from %2 succeeded for

user %3.

(%1 = CIM_ManagedElement.

ElementName;

%2 = Web or LegacyCLI;

%3 = user ID)

Info A user has successfully

updated one of the following

firmware components:

v IMM main application

v IMM boot ROM

v Server firmware

v Diagnostics

v Integrated service

processor

No action; information only.

Flash of %1 from %2 failed for user

%3.

(%1 = CIM_ManagedElement.

ElementName;

%2 = Web or LegacyCLI;

%3 = user ID)

Info An attempt to update a

firmware component from

the interface and IP address

has failed.

Try to update the firmware again.

The Chassis Event Log (CEL) on

system %1 is 75% full.

(%1 = CIM_ComputerSystem.

ElementName)

Info The IMM event log is 75%

full. When the log is full,

older log entries are

replaced by newer ones.

To avoid losing older log entries,

save the log as a text file and

clear the log.

Chapter 7. Troubleshooting 173

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 213 214

Commentaires sur ces manuels

Pas de commentaire

Lenovo ThinkServer TD200x Manuel d'utilisateur Page 189

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel informatique Lenovo ThinkServer TD200x