Lenovo ThinkServer RS110 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel informatique Lenovo ThinkServer RS110. Lenovo ThinkServer RS110 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 5
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Rack Installation Instructions
Review the documentation that comes with your rack cabinet for safety and cabling information. When
installing your server in a rack cabinet, consider the following:
v Ensure the room air temperature is below 35°C (95°F).
v Install the server only in a rack cabinet that has perforated doors.
v Do not block any air vents, usually 15 cm (6 in.) of air space provides proper airflow.
v Plan the device installation starting from the bottom of the rack cabinet.
v Install the heaviest device in the bottom of the rack cabinet.
v Do not leave open space above or below an installed server in your rack cabinet. To help prevent
damage to server components, always install a filler panel to cover the open space and to help ensure
proper air circulation.
v Do not extend more than one device out of the rack cabinet at the same time.
v Connect all power cords to properly wired and grounded electrical outlets.
v Do not overload the power outlet when installing multiple devices in the rack.
v Remove the rack doors and side panels to provide easier access during installation.
v The slide rails in this kit come preset to the correct length for installation in an IBM rack cabinet and
they are adjustable for other rack cabinets.
v The slide rails are marked (RIGHT/FRONT and LEFT/FRONT) for proper placement on the
rack-cabinet flanges.
Use safe practices when lifting.
18 kg (39.7 lb)
32 kg (70.5 lb)
55 kg (121.2 lb)
Do not place any object weighing more than
50 kg (110 lb) on top of rack-mounted devices.
50 kg (110 lb)
This server does not require any tools for installation, unless you are shipping the server in a rack. When
you are shipping the server in a rack, you will need a Philips screwdriver. The following illustration
shows the items that you need to install the server in a rack cabinet. If any items are missing or
damaged, contact your place of purchase.
Vue de la page 0
1 2 3 4 5

Résumé du contenu

Page 1

Rack Installation Instructions Review the documentation that comes with your rack cabinet for safety and cabling information. When ins

Page 2

1 Cable straps 4 M6 screws (for shipping and vibration-prone areas) 2 Slide rail 5 Shipping bracket 3 Front of rail 6

Page 3

Align the pins 1 on the front rail-locking carrier to the front mounting flange. If you adjusted the rail length, push the rail-

Page 4

78Attach cables to the rear of the server (such as keyboard, mouse, and monitor cables, if required). Route the cables to the left

Page 5 - (1P) P/N: 46U0857

First Edition (October 2008) Printed in the U.S.A. Lenovo and the Lenovo logo are trademarks of Lenovo in the United States, other

Modèles reliés ThinkServer RD120

Commentaires sur ces manuels

Pas de commentaire