Lenovo Secure Managed Client Manuel d'utilisateur télécharger pdf (Page 40)

2).

7. Remove the single screw (see 1 in the following figure) at the top of the

boot drive module and slide the module off the two chassis pins (see 2) in

the direction shown. Lift the boot drive module out of the enclosure (see 3).

8. With a #1 Phillips* screwdriver, remove the two screws securing the backplane

to the boot drive module. Remove the backplane from the boot drive module.

Figure 32. Removing brace assembly

Figure 33. Removing boot drive module

32 Secure Managed Client (SMC) - Storage Array Hardware Installation and Replacement Guide

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 51 52

Pas de commentaire

Lenovo Secure Managed Client Manuel d'utilisateur Page 40